The equipment consists of four parts: feeding belt line, glass turntable, camera detection station, and material distribution mechanism.
1. Feeding belt line
The magnetic sheet can be sent to the feeding belt line through the vibrating plate and other forms, and the feeding belt line guide block can be used to realize the feeding to the glass turntable mechanism.
2. Glass turntable mechanism
The glass turntable mechanism consists of an aluminum base bracket, a motor, a glass mounting plate, and a high-transparency tempered glass in sequence, and the bearing magnetic sheet enters the camera detection station smoothly.
3. Camera inspection station
The magnetic sheet sequentially enters the thickness detection station, the upper detection station, the right side detection station, the front detection station, the left detection station, and the lower detection station.
Position, length and width detection station, complete six face chipping detection and length, width and thickness size detection. Through software analysis, the magnetic sheet is divided into qualified products, appearance inspection
There are four categories of unqualified products, unqualified products in size inspection, and untested products.
4. Material distribution mechanism
Divided into four types of magnets controlled by solenoid valves
The air path is blown to the qualified blanking belt line, and the appearance inspection
Unqualified product belt line, size inspection unqualified product belt line, untested product belt line. Then import each item box in turn.
There is a soft material at the cutting end to connect the falling magnets to prevent the magnets from bumping.